Category Archives: Plumbing

5 Steps on How to Fix a Leaky Faucet

A leaky faucet can create many problems at home. Not only does it cause the wastage of a lot of water, it can also result in ugly stains developing in the sinks in the bathroom, kitchen floors or other areas of the house.


Whether it’s the cause of water pooling under your sink, or the annoying dripping sound that keeps you up at night, a leaky faucet is a nuisance that could turn into a full-blown problem if not addressed properly. Fortunately, putting a stop to a leaky faucet, such as the compression faucet in your kitchen, can be surprisingly inexpensive and simple.

Tools you’ll need:

• Adjustable wrench; C wrench

• Phillips and/or flat-head screwdriver

• Penetrating oil, such as WD-40 or CRC

• Replacement washers and O-rings

Step 1: Don’t make a mess worse by transforming your broken faucet into Old Faithful. Before applying any wrench or screwdriver to your fixture, make sure your water supply is turned off, from the handles over the sink to the knobs underneath that control the water coming in from the main line.

Step 2: Remove any decorative parts of the handle knobs. A simple prying with a flat-head screwdriver will take care of that. Underneath each knob, there will be a screw that mounts the handle to the stem. Unscrew, then gently remove the handle with your flat-head. Using penetrating oil can assist in loosening it, allowing you to take the faucet handle off the stem.

Step 3: Use your wrench to loosen the packing nut. From there you should notice the stem. Remove that as well. Depending on the faucet, some stems pop right off, while others twist off from the valve. Check the removed parts for any damage.

Read more:

Plumbing Issues Commonly Encountered

Plumbing is a very essential aspect of any commercial and residential building. It might be likened to the body’s circulatory system, which implies its malfunction is equivalent to death. This is not that surprising, since plumbing makes sure that life-sustaining fluids are transported to collecting depots, and wastes are taken out into the sewerage. If these two features don’t seem to be well-established, or if you’ll find any obstructions to their realization, there is certainly bound to be chaos. There are occasions when you are able to solve system issues by yourself, using house tools, like wrenches and plungers. But if you believe you’ve got big pipe problems brewing, you must call in plumbing contractors to diagnose and carry out the correct solutions.

Here are some of the common plumbing complications one can experience in the home and office setting.

Image result

(c) ProHomeAdviser

i. Toilet: Paper towels, diapers, feminine hygiene produces, baby wipes and foods are not intended to journey through sewage pipes. In numerous situations when kids are around, they often experiment by flushing toys and smaller home items down the toilet. However clogs or any toilet issues are not merely due to things inside but this can also be a sign of broken parts. Plumbers utilize a few standardized tools so that you can facilitate removal clogging, readjust pressure or replace parts. Meaning if you have already taken out the clog-causer and the toilet is still not operating right then it can be much more serious issue.

ii. Shower: This could either be leaks, heat fluctuation or congested showerheads. For shower leaks, one of the most likely intervention is to replace the damaged part of the shower head. For temperature regulation troubles, the technician should investigate first, because this could be brought on by water heater tank sediment built up, destroyed gas water heater pilot light, rust water pipes, or dysfunctional water heater regulators. A clogged showerhead is something you may repair by yourself, since it is most likely the outcome of mineral deposits. However if you simply are dealing with a complex unit, brushing sediments out might not be a possibility.

iii. Sinks and drains: Know the origin of the clog. You can get the source by running water in other sinks in the house. If all drains are clogged, or you are unable to unblock the trap yourself, call for plumbing service. Avoid using liquid plumber or similar products. One of the most common solutions people have for fixing a plumbing problem is to pour drain cleaner down the drain however are not only environmentally insensitive, but they are full of caustic toxins that can corrode your pipes and cause permanent damage to your drains.

iv. Water Heater: If you have a heating device for water with a tank, chances are high that the increasing pressure may lead to an explosion. A tank less water heater with a faulty heater plumbing can lead to an extremely slow trickle of water in the outflow. So do not disregard small issues experienced relating to your water heater.

Vaporooter Treatment – Dealing With Roots In Your Pipes

Vaporooter is definitely the usage of a laboratory-designed chemical foam treatment to eliminate any dangerous roots which could find the way into your sewage drainage systems. The chemical is poured down a drainage opening like the toilet and flows down and in to the sewage system in which it has a corrosive effect on any roots it comes into contact with.

Rather than waiting for the nuisance to turn into a serious problem expecting that the roots will develop elsewhere, resolve the issue now. When left unresolved, the problem of invasive roots is going to do more severe problem than to a minor treatment.

An experienced and skilled plumber may use a water jet or an electric eel to deal with the roots. These procedures will get rid of the roots but the problem is the fact that these roots usually tend of growing back thicker than ever before. To prevent this, it merely requires a lasting solution in dealing with the roots. Vaporooter covers this problem completely.

How Does It Work?

The use of the herbicide will kill the roots in the pipes and drain. It however does not damage the tree itself for the reason that foam simply wipes out the part of the root it is in contact with. The foam then bonds onto the walls of the pipe as well as any cracks and joints, and that means you won’t have any new root growth in your pipes for many years.

The treatment, in contrast to other treatments, will not corrode sewer lines. Its ingredients are very mild. The treatment is safe since it’s ingredients, metam sodium and dichlobenil are used to reduce the growth and development of weeds in food crop gardens. The treatment won’t harm the land close to the affected pipes. It makes sure that the environment is well cared for.

Generally after verifying the issue, the plumber will put on the foam within the drain to keep any new roots from growing in the drain. After that treatment, your drain and pipes would be root free for at least twelve months. You can ask for experts to return following the twelve months to check the condition of your pipes. They’re going to then advise whether Vaporooter needs to be reapplied.

Why Vaporooter Is Important:

1. The vaporooter treatment will save you time and expense.

2. It really is a convenient treatment option because it is only done once per year and you will enjoy a clear drain throughout the year.

3. Vaporooter works well for decreasing replacement of ruined pipes. It is because there aren’t any mechanical processes included in the treatment. Many mechanical treatments destroy the pipes.

4. In addition, it will save you time since the application requires a very short time. You don’t have to wait for a very long time for the plumbers in order to complete handling your sewer pipes.

The Benefits of Home Plumbing Supplies

Maybe you are thinking about those things you need at home, and you haven’t thought of purchasing a plumbing supply for your very own house. This really is among the supplies needed in the home to assure you happen to be able to fix things correctly when something goes wrong with your plumbing. Please read on this post below to comprehend that having plumbing supplies in your house will save you from a lot of things.

Image result

Clean water distribution system along with secure waste disposal schemes provides most of us to live without natural biological threats in the form of diseases. All such endeavors are merely possible because of plumbing system which we’ve got in each and every home. Imagine yourself without good plumbing? You should realize that ensuring good plumbing system will save you and your family from a lot of things. This is the time the plumbing tools and supplies come in importance. When they are readily available, damage and problems can be addressed and also your daily life won’t be affected.

Now, it’s important that after you look for the proper plumbing materials that will work with your water system, you will have access to the correct one. You will be able to encounter various options in terms of these plumbing supplies. Since there are a bunch of supplies out there for you to buy, it is essential that you discover the best supplier who offers supplies made from high grade materials that are sturdy enough for your convenience. . Your supplies doesn’t have to be branded however, you ought to be getting it from a reputable supplier to make sure that you will get tools and supplies that are made from top quality materials that is going to last longer.

If you wish to buy plumbing supply for your home, you need to understand the right size of these fittings and fixtures. You should know the correct measurement or the exact size of the pipe which needs to be repaired or jointed utilizing a new fitting. Furthermore, you need to be able to identify good quality fittings from the cheaper ones because you’ll pay way for more expenses when buying the cheap ones.

Whether you would like to learn tips on how to be a great plumber or you would like to understand the basic of plumbing for emergency purposes, having these few basic plumbing supplies in your tool box will keep your mind at ease, because these tools ensures you to do any particular job efficiently and quickly. You don’t must rush always in local stores to get things you need.


Drain plumbing advice

As a home owner, encountering a choke or two should be something common in your home. While we can do our utmost to prevent it from happening, we should always be prepared for the worst. A drain choke can leave us in a messy and unpleasant situation.

The best way to deal with a choke is to ensure that you have the proper equipment to declog your drain even before it happens. This is because a drain choke can come anytime when you are not expecting it. In most cases, you can have a rough guess on what is causing the choke base on the location of the choke.

  1. if it is below your sink: causes would usually be due to oil and food residues. to solve this, you need to know if the choke is in the bottle trap or further down the drain. Bottle trap chokes are easy to solve. Most of them are easy to unscrew and clean up or replace. However, if the choke is further down the pipe, you will probably need to use chemical such as those easily found on ntuc (chemical cleaner) before using a plunger. The use of chemical is usually safe but there has been cases where the chemical actually cause a fire/explosion before. As such it is best to engage a Singapore plumber in such cases.
  2. if the choke is in your toilet bowl/drain: this is usually cause by debris as such the best way to solve this is to either push it down or pull it up. In most cases, pushing down is a better option. To do this you will need to use a plumber snake which can be purchase at the hardware store.

While there is no right or wrong in your approach to cleaning a choke, do always be prepared for a possible mess of done wrongly especially if you are using a plunger. Most drain cleaning equipment can be found at NTUC or your neighbourhood hardware store. As such DIY is a easy and cheap way out if you can endure the stench and dirt.

Common Causes of Broken Pipes

Broken pipes are an unpleasant situation for every home owner, causing water leaks and increasing your bills. Sometimes, you may notice the problem immediately as a reduced water pressure, which indicates that a leak is damaging the base of your home creating a hazardous environment with mould and mildew.


Broken pipes not only cause household damage: they make headlines, too. Recently, we read the story of the Missouri homeowner who was out of town for a brief getaway when a common water supply line inside his house ruptured. He returned to find that his home had been inundated with nearly 45,000 gallons of water in his absence. Broken pipes can inflict severe water damage to structure and valuables, as well as make a house toxic due to mold growth. Most pipe ruptures fall into one of three categories:

broken pipesFreezing

In winter, it’s a major cause of indoor water damage. Anywhere they are contacted by air below 28 degrees Fahrenheit, pipes may freeze and rupture. Pipes in unconditioned areas like crawl spaces and attics are at particular risk. Placing slip-on foam insulating sleeves on accessible pipes helps prevent freezing. So does sealing cracks and openings that allow frigid outside air into crawl spaces or exterior walls where pipes are routed.


While galvanized steel pipes have long been known for corrosion and rupture, copper pipes may internally degrade as well, leading to eventual failure. A major factor in the corrosion of copper pipes is the pH factor of the local municipal water supply. Water with a pH below 7 is acidic and over time corrodes copper piping from the inside out. A red flag is the appearance of pinhole leaks that “weep” small amounts of water. Because they may mask severe internal corrosion and an impending catastrophic pipe rupture, pinhole leaks should never be …


Read more:

How to Keep Kitchen Sink Drainpipes Clean

A lot of waste goes through the kitchen drain, and because it can be a nasty job, we neglect to clean them regularly. Plumbers do not like to do it either so they will charge accordingly to do it for you.


Grease and food particles contribute to clogged drains.

The pipes under your kitchen sink have to funnel all kinds of sticky, greasy substances on a daily basis. If you have newer plumbing, with PVC or copper pipes, your sink drain can probably handle all this gunk — but if you have older, narrower iron plumbing, the pipes are likely to clog more often. Keep your pipes clean by controlling what you put in them and flushing them out when necessary.


Even if you have a garbage disposal, there are some substances you shouldn’t pour down your kitchen sink. Cooking grease, coffee grounds and fat you’ve trimmed off cuts of meat can accumulate in the pipes and lead to blockages, so always discard these things in the trash. Place a sink strainer over the drain, so large food particles don’t wash down the pipe, and empty the strainer frequently. If you have a garbage disposal, always run cold water down the drain while you use it to flush the ground-up food down and out of the drain pipe.

Using Water

If your sink isn’t prone to clogs and doesn’t develop musty odors, you can probably keep it clean using only water. If your kitchen sink has a stopper, close it once a week and fill the sink all the way. Then release the stopper and let the force of the water flush the pipes clean. If you don’t have a stopper in the sink, pour 3 to 4 cups of boiling water down the drain each week to dissolve grease buildup in the pipes.

Using Bleach

Sometimes water alone isn’t enough to keep pipes clean, particularly if they are old or connected to your local sewage plant. In that case, use bleach to clean and disinfect the pipes and dissolve clogs. Once a month, pour 12 ounces of chlorine bleach straight down the drain at the end of the day. Be careful not to let the bleach sit in the bowl of the sink, especially if the sink is stainless steel. In the morning, flush the pipe thoroughly with ..


Read more:

Plumbing Emergencies and How to Minimize Them

Households and also firm can’t get away from the point that plumbing outbreak could possibly take place. Breakouts in your plumbing fixtures are due to various aspects just like its position or location, utilization and its extended life Nevertheless you can also find circumstances that the reason behind it are inescapable like varying weather conditions such as freezing temperature or mishaps in the area which we could not control.

We’ll focus on many of the most typical plumbing conditions and describe their potential causes.


• Water leaks near the underground pipes: Possibly you have discovered areas of water on your back garden or out entrance of your house that never dry out. Should the water is bubbling up you have relatively apparent evidence of an underground water leak. There are various factors that cause this concern and here are a few; ruin from construction, temperatures and burst pipes caused by time and also other factors

• Clogged drains: Clogged drains are due to unknown items or particles which get stuck within the drain pipes, stopping the movement of water. Your kitchen sink, toilet and tub drains are exactly where the majority of backups begin caused by locks, fat, toilet tissue and various other objects that accumulate. Nevertheless, drain pipes may also turn into stopped up from these compounds in other areas of the plumbing, too – including the underground piping.

• Low water pressure: An incredibly frequent reason for low flow is stuff in the water. When you have previous iron pipes, plug with rust, and rust breaks loosely and plugs up aerators, valve, and wherever there’s a restriction in the pipes. Determining what is causing the issue is the initial step to effectively fixing it. Though, in some instances, you may simply have got to diagnose the issue by exploring all of the probable causes and making the essential repairs.

• Water heater issues: Water heaters commonly last many years – perhaps a decade or more. Even so, once you begin experiencing difficulty with a water heater – similar to leaks or a pilot which do not stay lit – it’s probably time to buy a new one as there are no easy, permanent fixes for this sort of challenge.

• Leaking indoor pipes: These are typically attributable to aging of plumbing fixtures, broken water pipe or worn out gaskets. These could actually end in the development of mildew and mold. Therefore, this can be very destructive not just in the property but will also lead to medical issues for you personally and your family.

• Leaking toilets: Leaking toilets are normally caused by damaged gasket on the tank or by a flawed waterline at its base. Continuous leaking from either part can also cause structural destruction as well as the growth of mold and mildew.

• Dripping faucet: Essentially the most common reasons behind dripping faucets are the weakened or worn components. If your faucet creates a drip, it usually means you must change the washer inside the tap. The washer provides a seal in compression faucets.
A number of these typical plumbing problems are DIY tasks that do not require the expertise of a certified plumber. Even so, should you aren’t sure how to cope with your plumbing difficulties, it is advisable to employ a licensed plumber to manage them for you. This way, you’ll be able to prevent any other harms or problems that may arise over the repair process.

Chlorine Filters For the Shower!

Acquiring and putting in a shower filter is amongst the quickest and most effective ways to protect yourself and your family from the possibly damaging effects of chlorine on the human body. It’s really no longer a question of whether you require a shower filter, but rather, which shower filter can produce the greatest results.


Chlorine is very dangerous to your hair; you will find the results first hand for yourself once you go swimming. It could bleach your hair and after a while it gets a shade of green. It can harden hair, and give the skin a blotchy texture. The dryness of the skin goes away completely with lotions however returns a short time later. Chlorine shower filters could avoid those same phenomena from occurring in your shower.

The beautician’s answer to this problem is chlorine shower filters. Removing the chlorine can enhance your skin and grant a smooth glowing look. Your hair will even become more supple and straightforward to deal with and any coloring lasts a lot longer. Generally everything looks and feels good.

There are other problems with chlorine, it may cause discomfort in the eyes and skin. The issues are numerous however the solution is just one. Chlorine shower filters save you from everything. Chlorine filters for shower heads keep the irritations away and allow your skin be its natural self again.

The doctors who treat allergies etc. additionally recommend chlorine shower filters. They are saying they are a safer, side-effect free approach to coping with chlorine aggravated respiratory problems. Chlorine is inhaled because of with hot showers. When water turns to steam you may breathe any contaminates in the water. This will worsen most respiratory allergies and asthma, causing anything which range from general discomfort to full on attacks. Chlorine Shower filters is again to the rescue. This time suggested by the doctors.

Even if it is not ingested, the chlorine gas that’s produced when water in which it is mixed is heated may be dangerous. The skin is affected due to gas made when a mixture of water and chlorine gas is warmed. The lung tissues can be affected directly when, at the time of bathing, the gas is inhaled.

The greatest thing about shower filters is how pretty cheap they are and how easy they are to set up and maintain. An average shower filter would operate from $40-$90 and must perform with average results. Even if you are willing to spend a little more money, more expensive shower filters do not really offer greater protection. The most important aspect of purchasing and utilizing a chlorine shower filter is if it’s going to perform to your level of expectation.

Don’t merely visit the store and purchase first thing you see. This means you must consider doing your research first prior to actually purchasing what you think is the best shower filter out there. You need to read available online reviews or in bed and bath magazines to ascertain the right one that will fit your price range. It’s also possible to go browsing and ask around at stores for the different pros and cons for a certain brand of shower water filter.

How To Fix a Damaged Reticulation System

Using a healthy lawn will certainly involve plenty of work. But, this just happens if you opt to do most of the tasks manually. Nowadays, you may choose to be smarter by using reliable maintenance equipment. Duties associated with lawn care can be done a lot easier and faster. Additionally, you only need a few bucks to carry it out. To make lawn maintenance a whole lot simpler and easier, among the strategies to consider is always to put in a reticulation system. Indeed, lots of residents with lawns and garden prove that this is a very worthy investment as it provides lots of great benefits.”

Watering is an essential task when you own a lawn or a garden. By watering plants regularly, lawn owners can help make their turf and flowers healthier and much more flourishing. Not to mention, watering can also make the soil better. Thus, to make sure you can water plants properly and adequately, you should go for reticulation systems. Nowadays, reticulation systems have benefited lawn owners, from minimizing gardening tasks, improving lawns and minimizing water usage. Therefore, owners are certain that they could give you the best for their lawns. But, there comes a period when these reticulation systems may break down or malfunction, which may be a huge problem.

Experiencing a lush garden involves common sense, adequate soil conditions and suitable reticulation equipment. Although reticulation system enables you to dedicate energy and time elsewhere, if you don’t occasionally look into the system, you might be pouring money down the drain. Breaks, leaks, broken fittings and split pipes are normal incidents and much water could be wasted especially if irrigation is under pressure. You need to be careful at looking at these signs.

Unattached or broken sprinkler head

Accidentally cutting over the reticulation or sprinkler head and damaging it is probably the most obvious and dire reasons you will have to have your reticulation system restored. Depending on the damage it acquired, qualified reticulation repair systems can deal with the head or advise that you have it replaced – often a more expensive choice. As such, upon having a reticulation system installed on your lawn, make sure that you go about your other gardening tasks, especially mowing, carefully.

Pooling water round the reticulation heads

Even though you may not see any kind of obvious cracks or damages on the heads, if you see water round the heads even after the system is turned off, this part may already be not working. The head itself may be defective and in need of speedy repair.

Wet and muddy parts on your lawn

 If you often observe wet and muddy areas that aren’t near any reticulation head, there might be a pipe break underground. This often demands speedy repairs to ensure that water coming from the system isn’t wasted and your grass and plants obtain the proper amount of hydration needed.

Excess water on driveways and sidewalks

This often indicates poor lawn irrigation system design and installation. It is a problem that has to be repaired right away as well since using a poor design will waste water on sidewalks, homes, driveways, and everywhere else but your lawn.

Brown spots on your lawn

 Finally, this sign indicates that no water is getting to these areas in your lawn. Reticulation repair professionals need to be contacted right away if you see these brown spots so that your turf and plants can get the correct amount of water they need immediately.