Category Archives: Plumbing

A Plumbing Inspection Checklist

Maintaining your home’s plumbing system is a vital part of any complete home maintenance plan. Even a simple checklist carried out at least 2 to 3 times yearly to avoid serious damages and plumbing emergencies. Using a checklist will make sure that you won’t miss anything. Bear in mind that your plumbing system contains sinks, toilets, showers, and bathtubs, and more. Considering you have spent a lot of cash for your plumbing, it is beneficial if this lasts longer.

That said, here’s a simple checklist to get handy when you schedule your home plumbing inspection. Know what to expect and the way to solve problems when they occur.

Toilets: Flush test is one easy way to determine if there are possible issues in the plumbing. Examine if there are odd sounds or if it’s becoming inadequate. Don’t forget to check out toilet supplies that don’t turn off after flushing. You need to look for signs of water or water leaks around each toilet. Additionally, gently but securely push and pull on each toilet to find out if it shifts or rocks.

Drains: You need to assess all sink and other fixtures the drain functions to check out how quick water drains. The typical factors behind slow water flow are a drain clog or a blocked vent pipe. All drains must display a complete “swirl” while emptying. When you notice bubbles as water is flowing down the sink, this might signify a water flow issue.

Showers and Tubs: Inspect shower stalls, tub surrounds, and other areas close to fixtures for loose or cracked tiles. A busted tile may be a sign that there’s, or was, a leak. There can be rotting behind or under the tile as an effect.

Water Heater: Many householders allow their water heaters go without inspection for a long time. A bad water heating tank can result in higher power bills or insufficient supply of hot water. You need to see if there are noises while the shower is switched on. As most systems employ gas, be on a gas leak alert. In case your unit smells of gas or rotten egg, get every member of the house outside and contact your local plumber.

Mildew: Check the residence for any mildew growth, since these grow in moist conditions it helps you to find leaking in the piping. Be sure that you get rid of these leaks as quickly as possible, and ensure that each of the portions is correctly sealed.

The intention of the plumbing inspection would be to give you assurance that your water supply and water heating operation is not compromised. A comprehensive inspection at least once a year can see your home’s integrity.

How To Thaw Frozen Pipes

When any pipes in your plumbing system freezes, it is put at risk for bursting. This means it’s going to freeze then break open. The water inside stretches when frozen, putting pressure on the pipe. As water freezes, it stretches slightly, and this can cause your pipes to burst. It fuses with air and gas inside, leading to further enlargement and ultimately the pipe can’t withstand the pressure and cracks open.

Having this challenge resolved by a professional plumber is obviously suggested, yet, if you’d like some pointers to thaw your frozen water pipes on the run, read the points given below.

(C) Guampdn.com

1.In case your pipes have frozen and you also notice hints that a pipe has broken, do not try to thaw the pipe. Phone a plumber instantly. But when a number of your pipes are frozen and do not appear broken, you can attempt to unfreeze them yourself.

2. When everything freezes, gas and air get trapped in the pipes. Turning the faucets on permits the air and gas to escape when they defrost. It is really an easy, safe way to keep things from breaking up. It is a smart idea to keep the water running, therefore forcing the water to stay moving, as opposed to allowing it to stay in the pipe and freeze.

3. If you notice that the slow drip has ceased, you may need to increase the flow slightly. Remember that the faucets needs to be allowed to drip provided that temperatures are below the freezing mark. Furthermore, consider allowing all faucets to drip like the showerheads and bathtub faucets.

4. Each of the plumbing features positioned within your home’s walls have some kind of insulation around them. You can wrap them yourself with an old bath towel and duct tape. There are also special devices available at most home improvement stores which you can use to thaw frozen pipes. In using a heating pad, hair dryer or any other electrical devices make certain they don’t contact water.

5. There are far more other methods to thaw a pipe. A space heater placed near to a pipe may also be quite effective. If the frozen pipe is under a sink close to an outer wall of your house, for example, open the cabinet doors and place the heater near to the cabinet. A space heater can be utilized together with other techniques and can keep the worker warm during the procedure. Heat lamps also work well. When using a heat lamp, be sure to keep it a foot away from the pipe being thawed. Do not put it on a wet area, and ensure that water does not drip on the appliance.

Professional plumbers also assert the importance of using electric pipe heating tapes to thaw frozen water pipes. People also tend to use plumbing torches for this purpose, but in case of ABS and PVC pipes, they hardly work. If nothing proves to be useful, contact for frozen pipe repair from a leading plumber company.

What Is A Vaporooter Treatment?

Vaporooter treatment is one way utilized in eliminating the roots thriving in pipes. These roots cause sewage obstruction. Vaporooter is a foam-based herbicide which enables to slow up the development of roots in the pipes in your plumbing system. It seeps the cell walls of the roots and bursts them. This will cause the roots to die and decay.

This treatment works and cuts down on cost that might have been utilized to remove the roots if they would have been left to develop. Roots that mature in the pipes destroy the plumbing systems and slow up the flow of waste water through the pipe.

Research supported that by intensive use has proved that Vaporooter is probably the most effectual method of ridding your sewer system out of roots. Plumbers could suggest using a water jet or an electric eel and using this may certainly clear some or all roots, which depend upon the skill and workmanship of the plumber. Vaporooter is definitely the solution.

How Does It Work?

Vaporooter has a foaming agent, contact herbicide and a growth inhibitor. The foaming agent helps in disbursing the product equally through the inner area of the pipe to ensure that all roots are reached.Vaporooter foam destroys the roots in the pipes and prevents regrowth. The root growth inhibitor attaches itself to organic materials inside a treated pipe and sterilizes soil that had roots before.

(C) Pioneernickel.com.au

(C) Pioneernickel.com.au

The treatment is a non- systematic herbicide. It means that it only impacts root material it comes into contact with. Utilizing it on your pipes is not going to harm your plants and trees near the sewer pipe. The foaming agent sticks to the inner part of the pipe including the roof. This makes sure that areas of the pipe which are prone to invasion like the top area are treated.

Before Vaporooter foam application, the plumber works with a high pressure water jet to clean the roots. This really is to make certain there’s a great surface contact for the Vaporooter agent to be effective. Then, the foam is pumped straight into the pipe. Over time, the roots die and start to decay. They then drop off and are washed away with the waste water.

Why Vaporooter Is Important:

1. It will probably cost you less instead of dealing a major plumbing problem.

2. The procedure can be carried out only two times in a year which means that your pipes will not require regular vaporooter applications hence saving you a lot more money.

3. The usage of Vaporooter treatment won’t damage pipes much like the mechanical treatment options very often result in damaging pipes. It is a safer alternative.

4. Additionally, it helps save time since the application needs a very short time. You don’t need to to wait for a long time for the plumbers in order to complete handling your sewer pipes.

Home Repair for Frozen Pipes

Frozen pipes are a serious winter plumbing problem. Because ice expands, frozen pipes can burst and cause flooding when they subsequently thaw. Therefore, they require immediate attention.

 

frozen water pipes

Frigid temperatures make home repair for frozen pipes a useful skill for any homeowner. While no homeowner wants to deal with frozen pipes, knowing how to fix the problem reduces the stress should the situation arise.

 

Problems with Frozen Pipes

Water pipes sometimes freeze during spells of extremely cold temperatures. Pipes are more likely to freeze in uninhabited homes that aren’t heated, have a low thermostat temperature and have no water flowing through the pipes. Pipes that run through exterior walls are also more susceptible to freezing, particularly when the outdoor temperatures are very low. Pipes that run through unheated areas such as the attic or basement crawl spaces are also more likely to freeze.

Frozen water pipes are more than an inconvenience. There is a good chance the pipes will crack or burst because the water expands as it freezes. If damage does occur to the pipes, you’ll end up with quite an expensive mess when the ice thaws. The water can cause severe damage to the walls, floors and other parts of the home in addition to the pipes needing replacement.

Ways to Prevent Frozen Pipes

Preventing frozen pipes in the first place is the best course of action for a homeowner. There are several steps you can take to prevent frozen pipes during the cold winter months.

  • Keep a small trickle of water running through the faucets. Flowing water is much less likely to freeze than water that is standing still.
  • Don’t lower the thermostat too much, particularly during extremely cold temperatures. If you’re going away, never set your thermostat lower than 55 degrees.
  • Add insulation to the exposed water pipes, particularly in unheated areas of the attic and crawl spaces. You can purchase pipe insulation at the home improvement store that you cut to length and place on the pipes.
  • Look for air leaks in the home, particularly near water pipes. Seal these leaks to keep the pipes warm.
  • Add insulation to attics and crawl spaces to increase the area’s overall heat level.

Tips on Home Repair for Frozen Pipes

If it’s too late for prevention and your pipes are already frozen, proceed with caution. You’ll want to keep an eye out for cracks and other damage to the pipes. These steps can help you thaw the pipes yourself.

 

Read more: http://homeimprovement.lovetoknow.com/Home_Repair_for_Frozen_Pipes

How To Fix A Leaky Faucet

Image result for fix a leaky faucet

(c) HireRush.com

How many nights have you ever spent up listening to the irritating dripping of a leaky faucet? Unlike popular belief, not every leaks are so elaborate that only a plumber is capable of fixing them. Everything that is basically necessary is a simple visit to a local or online parts supplier and do the repair by yourself.

In this article I will talk about how to fix small leaks in your bathroom faucets. Although there are numerous different types of faucets all of them still have exactly the same basic parts and are fundamentally assembled the same way as well. Several steps should be reviewed prior to determining which route to take when preparing to fix a leaking bathtub faucet.

First thing you must do is figure out the type of faucet, whether it’s a compression faucet that has hot and cold handles, or non-compression faucet which has just one lever or knob. The instructions below go over repairs for a non-compression faucet.

Step One: Shut off the water at the stop valve itself and not only turning off the cap. This should be located below your sink. Figure out also if the leaking water is either hot or cold, that way it is easy to figure out which pipe is damaged.

Step Two: Remove the drain then take off the screw that’s holding fastening the handle to the faucet. Some can be eliminated by a screwdriver or by simply prying it with force.

Step Three: Remove the nut and the stem. It may be simpler if you use an adjustable wrench or a pair of pliers to lock the nut. Then cautiously lift up the stem from the faucet. The packing nut, and the valve stem are all eliminated by converting them counter clockwise.

Step Four: A likely culprit for a leaky faucet in the bathroom is a bad washer. The washer may be located in the connection or at the end of the spout. Begin by looking at the end of the spout and find out if there are any problems with the material. Get rid of part and check on your local hardware for the similar unit. It is important that you get the correct part so a professional’s advice is suggested.

Step Five: After buying all the replacement parts, let us assume of course that you have bought a new washer. Place the washer against the base, flat side first then put the screw back, holding the washer tight. You might want to add some lubricant round the threads since this will ensure easier removal in the future. Replace the packing nut and then the handle.

If there is still a leak, take the leaky faucet apart and re-tighten every part, and if it still does not work, get in touch with a plumber. Typically, it’s easy to correct a dripping bathtub faucet, however, if the task at hand becomes too overwhelming, remember that there are pros ready with a hands-free solution to fix the leaky bathtub faucet.

Trenchless Sewer Repair

Image result for Trenchless Sewer Repair

(c) nwwsewerrepair.com

There is certainly almost nothing that puts more fear to the hearts of householders than learning that your sewer line ought to be repaired. Pictures of your lovely lawn being dug up and living without utilities for days flashes through your mind. Thank goodness now we have Trenchless pipe repair or pipe rehabilitation or no dig repair method which does not require digging trenches and destroying the backyard. Instead of digging trenches, professionals utilize sewer access holes to correct or reline a sewer line by using state-of-the-art equipment. If access holes aren’t already available, then they will dig two small access holes that will also come in handy when next time you’ll need this service.

Listed here are the key advantages you need to know to assist you assessing if the trenchless repair is your smartest choice for fixing your plumbing issues.

• Keeping your yard and landscape intact is yet another problem going through homeowners whose sewer line needs repair. As it has no major digging required, it’ll result to a far more intact and less messy yard. You won’t need to bother about your landscape, cable or gas line since it will only dig 2 access points.

• No dig implies no reforming of ground, so your yard, driveway, plants, fences, and each and every other feature of your property will always be intact. This implies lower expenses involved when repairing your sewer line. Yet, some may take advantage of this approach so you have to perform your research and check for a corporation that’s dependable and provides a significantly lower fee. Do a comparison of the prices and use tool such as internet for much more choices.

• With a trenchless sewer repair, getting the task finished is a lot quicker. A standard sewer repair could take days to finish. Therefore disrupted utility services in your house or building for a while. With a trenchless repair, the job may be completed in a day or maybe in only a few hours.

• Forget about replanting uprooted plants, replacing a fence or repaying people to put the dug soil back in. Trenchless sewer repair leaves no mess behind unlike fliers and other modes.

A trenchless sewer repair can be achieved in two ways. The first way which is known as pipe relining will involve putting a fiber glass liner inside pipes which were damaged. The second way will need to burst apart the old and damaged pipe as a new sewer pipe is pulled through and put on its place.

These are just some of the advantages of a trenchless sewer repair. If you’re to compare these benefits to the ones that other conventional methods offer, trenchless repairs will hand down win.

Just do your own research if required thus you can make the smartest decision for your home whenever considering trenchless sewer repair for your sewer issues.

How to Deal with a Clogged Toilet

A clogged toilet can be incredibly frustrating and messy. Fortunately, you can take care of most clogged toilet repair without needing to find a plumber. Finishing your clogged toilet repair is often very simple and cheap.

 

How to Deal with a Clogged Toilet

t’s every renter’s nightmare. You finally have a place all to yourself and you’ve managed to only last a week until disaster strikes: a clogged toilet. You panic. What can you do? You are too embarrassed to ask anyone for help.

Maybe if you just try to flush one more time … You do, and then the toilet bowl begins to fill with water. It approaches the brim, you freak out and grab the nearest clothes hanger to use as a makeshift plunger.

You begin furiously prodding at your toilet hole to dislodge the blockage. Next thing you know you are standing in an inch of toilet water with a mangled wire hanger firmly entrenched in your toilet’s lower intestine.

This is not a pretty picture.

And yet, this may be more common than you realize. According to a recent Rent.com survey, the most common problem that renters have to call their landlords to fix is a clogged toilet. It also happens to be the one thing renters would be most embarrassed to call their landlord about.

Let’s spare everyone the embarrassment by going over a whole host of different ways you can unclog a toilet without calling for backup. No matter what the “blockage” may be, there are a number of tools and strategies that you can use to get your plumbing back in working order.

The Plunger Method

How to Deal with a Clogged Toilet - Plunger

Perhaps the most common way of clearing a clogged toilet drain is to use a plunger. For those of you who have been living in an igloo in the Yukon for the last 50 years and are unfamiliar with what a plunger is, it sort of resembles a rubber suction cup on a stick.

Read more: http://blog.rent.com/how-to-deal-with-a-clogged-toilet/

5 Steps on How to Fix a Leaky Faucet

A leaky faucet can create many problems at home. Not only does it cause the wastage of a lot of water, it can also result in ugly stains developing in the sinks in the bathroom, kitchen floors or other areas of the house.

 

Whether it’s the cause of water pooling under your sink, or the annoying dripping sound that keeps you up at night, a leaky faucet is a nuisance that could turn into a full-blown problem if not addressed properly. Fortunately, putting a stop to a leaky faucet, such as the compression faucet in your kitchen, can be surprisingly inexpensive and simple.

Tools you’ll need:

• Adjustable wrench; C wrench

• Phillips and/or flat-head screwdriver

• Penetrating oil, such as WD-40 or CRC

• Replacement washers and O-rings

Step 1: Don’t make a mess worse by transforming your broken faucet into Old Faithful. Before applying any wrench or screwdriver to your fixture, make sure your water supply is turned off, from the handles over the sink to the knobs underneath that control the water coming in from the main line.

Step 2: Remove any decorative parts of the handle knobs. A simple prying with a flat-head screwdriver will take care of that. Underneath each knob, there will be a screw that mounts the handle to the stem. Unscrew, then gently remove the handle with your flat-head. Using penetrating oil can assist in loosening it, allowing you to take the faucet handle off the stem.

Step 3: Use your wrench to loosen the packing nut. From there you should notice the stem. Remove that as well. Depending on the faucet, some stems pop right off, while others twist off from the valve. Check the removed parts for any damage.

Read more: http://www.popularmechanics.com/home/how-to/a3095/5-steps-to-fix-a-leaky-faucet-15470175/

Plumbing Issues Commonly Encountered

Plumbing is a very essential aspect of any commercial and residential building. It might be likened to the body’s circulatory system, which implies its malfunction is equivalent to death. This is not that surprising, since plumbing makes sure that life-sustaining fluids are transported to collecting depots, and wastes are taken out into the sewerage. If these two features don’t seem to be well-established, or if you’ll find any obstructions to their realization, there is certainly bound to be chaos. There are occasions when you are able to solve system issues by yourself, using house tools, like wrenches and plungers. But if you believe you’ve got big pipe problems brewing, you must call in plumbing contractors to diagnose and carry out the correct solutions.

Here are some of the common plumbing complications one can experience in the home and office setting.

Image result

(c) ProHomeAdviser

i. Toilet: Paper towels, diapers, feminine hygiene produces, baby wipes and foods are not intended to journey through sewage pipes. In numerous situations when kids are around, they often experiment by flushing toys and smaller home items down the toilet. However clogs or any toilet issues are not merely due to things inside but this can also be a sign of broken parts. Plumbers utilize a few standardized tools so that you can facilitate removal clogging, readjust pressure or replace parts. Meaning if you have already taken out the clog-causer and the toilet is still not operating right then it can be much more serious issue.

ii. Shower: This could either be leaks, heat fluctuation or congested showerheads. For shower leaks, one of the most likely intervention is to replace the damaged part of the shower head. For temperature regulation troubles, the technician should investigate first, because this could be brought on by water heater tank sediment built up, destroyed gas water heater pilot light, rust water pipes, or dysfunctional water heater regulators. A clogged showerhead is something you may repair by yourself, since it is most likely the outcome of mineral deposits. However if you simply are dealing with a complex unit, brushing sediments out might not be a possibility.

iii. Sinks and drains: Know the origin of the clog. You can get the source by running water in other sinks in the house. If all drains are clogged, or you are unable to unblock the trap yourself, call for plumbing service. Avoid using liquid plumber or similar products. One of the most common solutions people have for fixing a plumbing problem is to pour drain cleaner down the drain however are not only environmentally insensitive, but they are full of caustic toxins that can corrode your pipes and cause permanent damage to your drains.

iv. Water Heater: If you have a heating device for water with a tank, chances are high that the increasing pressure may lead to an explosion. A tank less water heater with a faulty heater plumbing can lead to an extremely slow trickle of water in the outflow. So do not disregard small issues experienced relating to your water heater.

Vaporooter Treatment – Dealing With Roots In Your Pipes

Vaporooter is definitely the usage of a laboratory-designed chemical foam treatment to eliminate any dangerous roots which could find the way into your sewage drainage systems. The chemical is poured down a drainage opening like the toilet and flows down and in to the sewage system in which it has a corrosive effect on any roots it comes into contact with.

Rather than waiting for the nuisance to turn into a serious problem expecting that the roots will develop elsewhere, resolve the issue now. When left unresolved, the problem of invasive roots is going to do more severe problem than to a minor treatment.

An experienced and skilled plumber may use a water jet or an electric eel to deal with the roots. These procedures will get rid of the roots but the problem is the fact that these roots usually tend of growing back thicker than ever before. To prevent this, it merely requires a lasting solution in dealing with the roots. Vaporooter covers this problem completely.

How Does It Work?

The use of the herbicide will kill the roots in the pipes and drain. It however does not damage the tree itself for the reason that foam simply wipes out the part of the root it is in contact with. The foam then bonds onto the walls of the pipe as well as any cracks and joints, and that means you won’t have any new root growth in your pipes for many years.

The treatment, in contrast to other treatments, will not corrode sewer lines. Its ingredients are very mild. The treatment is safe since it’s ingredients, metam sodium and dichlobenil are used to reduce the growth and development of weeds in food crop gardens. The treatment won’t harm the land close to the affected pipes. It makes sure that the environment is well cared for.

Generally after verifying the issue, the plumber will put on the foam within the drain to keep any new roots from growing in the drain. After that treatment, your drain and pipes would be root free for at least twelve months. You can ask for experts to return following the twelve months to check the condition of your pipes. They’re going to then advise whether Vaporooter needs to be reapplied.

Why Vaporooter Is Important:

1. The vaporooter treatment will save you time and expense.

2. It really is a convenient treatment option because it is only done once per year and you will enjoy a clear drain throughout the year.

3. Vaporooter works well for decreasing replacement of ruined pipes. It is because there aren’t any mechanical processes included in the treatment. Many mechanical treatments destroy the pipes.

4. In addition, it will save you time since the application requires a very short time. You don’t have to wait for a very long time for the plumbers in order to complete handling your sewer pipes.